Cable lug 120 qmm. M10 Dynamic
Crimp cable lug for copper conductor 120 qmm. M 10 Dynamic
Create a press cable lug is an electrical connector used to firmly and securely attach a wire to a device, component, or another cable. The cable lug is pressed onto the wire or cable using special crimping tools to create a solid, reliable electrical connection. This improves electrical conductivity and prevents a loose or unreliable connection.
The number after the M represents the metric bolt size to be connected.
Advantages DYNAMIC
Below you will find the main reasons to choose the DYNAMIC series;
• Less heat development
• Lower inventories (one type of cable lug is sufficient)
• Number of pressings shown on the cable lug
• More reliable under long-term high loads
• Fewer problems in practice due to clear communication
• Connections according to NEN-EN-IEC 61238-1-1-2019
• Produced according to CU+ treatment
120 sq mm cable lug at Bos Elektro
Also view our full range cable, our extension cables en construction distribution boxesYou can read more about standards for cables and installations at NEN.
Cable lugs are crimped onto the cable conductors and then screwed onto terminals or rails. A properly crimped cable lug ensures low contact resistance and a reliable connection.
Always use a cable lug that matches the cross-section of the cable and the bolt size of the connection, and crimp it with the correct crimping tool.
- Available per meter or on a reel
- Supplied by a specialist in construction power and cable assembly
- Available from stock or on request
Unroll cables completely before using them under full load to prevent overheating. Lay the cable down so that it cannot be kinked, run over, or pinched, and regularly check the sheath and connections for damage. Have electrical equipment on the construction site inspected periodically in accordance with NEN 3140.
Yes, we supply cable by the meter and on reels. Please contact us for larger quantities or specific lengths.
That depends on the current, the length of the cable, and the installation method. Our specialists would be happy to calculate it for you.
Yes, in addition to cable, we supply plugs, coupling plugs, sockets, and cable lugs, so you get everything for your cable assembly from a single source.
Bos Elektro has been a specialist in construction power and cable assembly since 1985. We process large quantities of cable daily and supply contractors, installers, and wholesalers. Would you like to know which cable best suits your application, or do you need a larger quantity? Contact us; we are happy to help you find the right solution for the 120 sq mm cable lug.
Choosing a cable for your project
When choosing a cable, the load, length, environment, and installation method play a role. For instance, a cable dragged across the construction site requires a different design than a cable fixed in the ground. Our specialists help you make the right choice.
Delivery and service
Bos Elektro supplies contractors, installers, rental companies, and wholesalers in the Netherlands and Belgium. We supply larger quantities and reels on request; please inquire about the possibilities and delivery time.
Working safely with cables
Regularly check cables for damage to the sheath, use the correct connection materials, and have installations and equipment inspected periodically. This prevents malfunctions and ensures you work safely.
Everything for construction power from a single source.
At Bos Elektro, in addition to cables, you will also find extension cables, distribution boxes, meter cabinets, construction lighting, and CEE plugs. This way, you get the complete temporary installation for the construction site from a single supplier.
