Masts

MASTS
Mast extendable to maximum height of 10 metres

The mast is extremely safe and stable. It does, however, have to be mounted on, for instance, a stelcon plate or be given at least 1000 kg ballast*
The mast is suitable for the following floodlights, among others:

Floodlights
6 x halogen            1000 Watt
3 x HQI or NAV-T     400 Watt
1 x HQI                  1000 Watt
1 x HQI                  2000 Watt

Total maximum weight: 30 kg.

Wind surface area: 0.75 m²

The mast consists of 4 parts that can be drawn in or extended with the aid of stainless steel ball bearings and can reach a total height of 10 metres. The mast comes standard with hoisting eyes and mounting points for a stelcon plate, for instance. When fully collapsed, the mast can be easily pulled onto its side. In this position, it is possible to move the mast components to every desired height so you can easily mount the floodlights on it.

Because the mast can be completely folded, it becomes quite compact so several masts can be stacked on top of each other. This gives an enormous space savings for transportation and storage.

This telescopic mast is extended or collapsed with a winch equipped with a manual brake, or with an electric worm wheel winch. These units can be attached to the mast easily and without tools, and can of course be used for several masts.

The winch can be taken as a tool from one job to another, with the exception of the permanently mounted hand winch. Another advantage is that the mast can be moved only with this winch, by authorized personnel who are in the possession of this unit. Fixed winches are subject to corrosion and can be stolen.

Dimension in cm:
Base:                                 200 x 200 cm.
Maximum height:                1000 cm.
Dimensions when laid
on its side (HxWxD)             about 52 x 100 x 435
Weight in kg.                      about 350

MASTS 16M
Mast extendable to maximum height of 16 metres

As a result of its height of 16 metres, this mast is extremely suit-able to obtain maximum output from an HQI light of 2000 Watt. It does however, have to be mounted on, for instance, a stelcon plate or be given at least 1500 kg ballast*
The mast is suitable for the following floodlights, among others:

Floodlights
6 x halogen          1000 Watt
3 x HQI or NAV-T   400 Watt
1 x HQI                1000 Watt
1 x HQI                2000 Watt

Total maximum weight: 30 kg.

Wind surface area: 0.75 m²

The mast consists of 6 parts that can be drawn in or extended with the aid of stainless steel ball bearings and can reach a total height of 16 metres. The mast comes standard with hoisting eyes and mounting points for a stelcon plate, for instance. When fully collapsed, the mast can be easily pulled onto its side. In this position, it is possible to move the mast components to every desired height so you can easily mount the floodlights on it.

Because the mast can be completely folded, it becomes quite compact so several masts can be stacked on top of each other. This gives an enormous space savings for transportation and storage.

This telescopic mast is extended or collapsed with a winch equipped with a manual brake, or with an electric worm wheel winch. These units can be attached to the mast easily and without tools, and can of course be used for several masts.

The winch can be taken as a tool from one job to another, with the exception of the permanently mounted hand winch. Another advantage is that the mast can be moved only with this winch, by authorized personnel who are in the possession of this unit. Fixed winches are subject to corrosion and can be stolen.

Dimension in cm:
Base:                              200 x 200 cm.
Maximum height:             1600 cm.
Dimensions when laid
On its side (HxWxD)         about 52 x 200 x 440
Weight in kg.                   about 500